Synchromesh Pulley Only - 15 teeth / 5mm bore

$ 10.00


his a synchormesh pulley (15 teeth) with 5mm shafts to match 3.81mm synchromesh pitch cable.

Pulleys are made of strong nylon with a brass hub and a set screw. Set screw uses 1.5mm hex key to tighten.

The synchromesh cable is manufactured by combining coating technology and wire-twisting technology. This provides the advantage of cables (possible 3D distribution) and the convenience of timing belts (easy mounting). This synchromesh cable employs the same gear-mesh type transmission as the timing belt.

Calculating Travel:

The cable is 3.81mm pitch and the wheel has 15 teeth = 15 * 3.81mm = 57.15mm per revolution.

For 200 step (full step) stepper motor = 57.15 / 200 = .28575mm / step or 3.4995 steps / mm
For 3200 step (1/16 micro steps) = 57.15 / 3200 = .017859375mm / micro step or 55.993 steps / mm
For 6400 step (1/32 micro steps) = 57.15 / 6400 = .0089296875 / micro step or 111.986 steps / mm

Synchromesh Information Links:

http://www.asahi-intecc.com/industrial/product/synchro_mesh.html


More from this collection